Yes, the hub is identical
Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Nissan Qashqai J11 bolt on and centre on Nissan Juke I without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Nissan Qashqai J11 is compared with the one from Nissan Juke I of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6.5Jx16 ET40 · 215/65R16 — Fits like the original
Compared with the original 6.5Jx16 ET40 on Nissan Juke I: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +5.1 % : fit it with the original tyre size of Nissan Juke I (205/60R16), not that of Nissan Qashqai J11.
Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Juke I (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Nissan Juke I on Nissan Qashqai J11?