Yes, the hub is identical
Same 5x110 PCD and same 65.1 mm centre bore: wheels from Opel Adam S bolt on and centre on Fiat 500X without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Opel Adam S is compared with the one from Fiat 500X of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈6Jx16 ET55 · 195/55R16 — Check on the car
Compared with the original 6.5Jx16 ET41 on Fiat 500X: shock absorber side +7.6 mm, wheel arch side −20.4 mm, tyre diameter −6.5 % : fit it with the original tyre size of Fiat 500X (215/60R16), not that of Opel Adam S.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat 500X (-), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Fiat 500X on Opel Adam S?