FRENES

Wheels from Peugeot 1007 on Peugeot 106 4 trou: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 1007 bolt on and centre on Peugeot 106 4 trou without rings. You still need to check the offset and tyres, detailed below.

Peugeot 10072004–2009Peugeot 106 4 trou1992–2005
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels ≈5.5Jx14 ET27 ≈5.5Jx14 ET18

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot 1007 is compared with the one from Peugeot 106 4 trou of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈5.5Jx14 ET27 · 175/65R14 — Check on the car

    Compared with the original ≈5.5Jx14 ET18 on Peugeot 106 4 trou: shock absorber side +9 mm, wheel arch side −9 mm, tyre diameter +9.9 % : fit it with the original tyre size of Peugeot 106 4 trou (175/50R14), not that of Peugeot 1007. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 106 4 trou (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Peugeot 106 4 trou on Peugeot 1007?