Same 5x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 408 bolt on and centre on Peugeot 5008 II without rings. You still need to check the offset and tyres, detailed below.
| Peugeot 408from 2022 | Peugeot 5008 II2017–2024 | |
|---|---|---|
| PCD | 5x108 | 5x108 |
| Centre bore | 65.1 mm | 65.1 mm |
| Thread | M12x1.25 | M12x1.25 |
| Original wheels | 7Jx17 ET42 | 7Jx17 ET42 7.5Jx18 ET49 |
≈: width estimated from the original tyre size.
Each original wheel from Peugeot 408 is compared with the one from Peugeot 5008 II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 7Jx17 ET42 on Peugeot 5008 II: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 5008 II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Peugeot 5008 II on Peugeot 408?