FRENES

Wheels from Peugeot 5008 II on Peugeot 5008 I: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 5008 II bolt on and centre on Peugeot 5008 I without rings. You still need to check the offset and tyres, detailed below.

Peugeot 5008 II2017–2024Peugeot 5008 I2009–2017
PCD5x1084x108 / 5x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 7Jx17 ET42
7.5Jx18 ET49		 7Jx16 ET29
≈7Jx17 ET49

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot 5008 II is compared with the one from Peugeot 5008 I of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx17 ET42 · 215/65R17 — Check on the car

    Compared with the original ≈7Jx17 ET49 on Peugeot 5008 I: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • 7.5Jx18 ET49 · 225/55R18

    Peugeot 5008 I has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 5008 I (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Peugeot 5008 I on Peugeot 5008 II?