FRENES

Wheels from Peugeot Rifter on Opel Combo: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Peugeot Rifter bolt on and centre on Opel Combo without rings. You still need to check the offset and tyres, detailed below.

Peugeot Rifterfrom 2018Opel Combo1994–2001
PCD5x1084x100 / 5x98 / 5x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.50
Original wheels ≈6Jx15 ET47 ≈5Jx13 ET49
≈6Jx15 ET39
≈6Jx15 ET47

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot Rifter is compared with the one from Opel Combo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET47 · 195/65R15 — Check on the car

    Compared with the original ≈6Jx15 ET39 on Opel Combo: shock absorber side +8 mm, wheel arch side −8 mm, tyre diameter +2.1 % : fit it with the original tyre size of Opel Combo (185/65R15), not that of Peugeot Rifter. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Opel Combo (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Opel Combo on Peugeot Rifter?