FRENES

Wheels from Renault Grand Kangoo on Dacia Duster II: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Grand Kangoo bolt on and centre on Dacia Duster II without rings. You still need to check the offset and tyres, detailed below.

Renault Grand Kangoofrom 2024Dacia Duster II2017–2024
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.50M12x1.50
Original wheels 6.5Jx16 ET40 6Jx16 ET50
6.5Jx16 ET50
6.5Jx17 ET50

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Grand Kangoo is compared with the one from Dacia Duster II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET40 · 205/60R16 — Check on the car

    Compared with the original 6.5Jx16 ET50 on Dacia Duster II: shock absorber side −10 mm, wheel arch side +10 mm, tyre diameter −4.9 % : fit it with the original tyre size of Dacia Duster II (215/65R16), not that of Renault Grand Kangoo. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Dacia Duster II (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Dacia Duster II on Renault Grand Kangoo?