Yes, with hub centric rings
Same 5x114.3 PCD, but the centre bore of the wheels from Renault Trafic (100 mm) is larger than the hub of Renault Arkana (66.1 mm): you need 4 hub centric rings 100 → 66.1.
Rings 100 → 66.1
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Renault Trafic is compared with the one from Renault Arkana of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈6.5Jx16 ET50 · 205/65R16 — Check on the car
Compared with the original ≈7Jx16 ET35 on Renault Arkana: shock absorber side +8.7 mm, wheel arch side −21.4 mm, tyre diameter −1.9 %.
Comparison for guidance only (estimated width). Check in detail
- ?
≈6Jx14 ET36 · 185/75R14
Renault Arkana has no 14-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Arkana (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Arkana on Renault Trafic?