Yes, with hub centric rings
Same 5x112 PCD, but the centre bore of the wheels from Rolls-Royce Ghost (72.6 mm) is larger than the hub of BMW i7 (66.6 mm): you need 4 hub centric rings 72.6 → 66.6.
Rings 72.6 → 66.6
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Rolls-Royce Ghost is compared with the one from BMW i7 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈8Jx19 ET25 · 255/50R19 — Fits like the original
Compared with the original 8.5Jx19 ET26 on BMW i7: shock absorber side −7.3 mm, wheel arch side −5.3 mm, tyre diameter +1.4 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BMW i7 (M14x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from BMW i7 on Rolls-Royce Ghost?