FRENES

Wheels from Saturn Astra 5 trou on Opel Meriva: compatible?

Yes, the hub is identical

Same 5x110 PCD and same 65.1 mm centre bore: wheels from Saturn Astra 5 trou bolt on and centre on Opel Meriva without rings. You still need to check the offset and tyres, detailed below.

Saturn Astra 5 trou2007–2010Opel Merivafrom 2010
PCD5x1105x110
Centre bore65.1 mm65.1 mm
ThreadM12x1.50M12x1.50
Original wheels ≈6Jx15 ET35 6.5Jx15 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Saturn Astra 5 trou is compared with the one from Opel Meriva of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈6Jx15 ET35 · 195/65R15 — Fits like the original

    Compared with the original 6.5Jx15 ET35 on Opel Meriva: shock absorber side −6.4 mm, wheel arch side −6.4 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Opel Meriva (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Opel Meriva on Saturn Astra 5 trou?