FRENES

Wheels from Seat Ateca on Seat Alhambra: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Seat Ateca bolt on and centre on Seat Alhambra without rings. You still need to check the offset and tyres, detailed below.

Seat Atecafrom 2016Seat Alhambra1996–2001
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadEcrous - 14x1.50M14x1.50
Original wheels 6Jx16 ET43 ≈6Jx15 ET55
≈6Jx16 ET55
≈6.5Jx16 ET39

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Seat Ateca is compared with the one from Seat Alhambra of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET43 · 215/60R16 — Check on the car

    Compared with the original ≈6Jx16 ET55 on Seat Alhambra: shock absorber side −12 mm, wheel arch side +12 mm, tyre diameter +3.7 % : fit it with the original tyre size of Seat Alhambra (195/60R16), not that of Seat Ateca. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Seat Alhambra (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Seat Alhambra on Seat Ateca?