Yes, the hub is identical
Same 5x100 PCD and same 57.1 mm centre bore: wheels from Skoda Scala bolt on and centre on Skoda Fabia Scout without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Skoda Scala is compared with the one from Skoda Fabia Scout of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
6Jx15 ET35 · 195/65R15 — Check on the car
Compared with the original ≈6Jx15 ET42 on Skoda Fabia Scout: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter +8.6 % : fit it with the original tyre size of Skoda Fabia Scout (185/55R15), not that of Skoda Scala.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Skoda Fabia Scout (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Skoda Fabia Scout on Skoda Scala?