FRENES

Wheels from Subaru Solterra on Suzuki Across: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Subaru Solterra bolt on and centre on Suzuki Across without rings. You still need to check the offset and tyres, detailed below.

Subaru Solterrafrom 2022Suzuki Across2020–2025
PCD5x114.35x114.3
Centre bore60.1 mm60.1 mm
ThreadM14x1.50Ecrous - 12x1.50
Original wheels ≈7.5Jx18 ET40 R
≈7Jx18 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Subaru Solterra is compared with the one from Suzuki Across of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx18 ET40 · 235/60R18 — Check on the car

    Compared with the original ≈7Jx18 ET40 on Suzuki Across: shock absorber side +6.4 mm, wheel arch side +6.4 mm, tyre diameter +1.7 %. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Suzuki Across (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Suzuki Across on Subaru Solterra?