FRENES

Wheels from Toyota BZ4X on BYD Atto 3: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Toyota BZ4X bolt on and centre on BYD Atto 3 without rings. You still need to check the offset and tyres, detailed below.

Toyota BZ4Xfrom 2022BYD Atto 3from 2021
PCD5x114.35x114.3
Centre bore60.1 mm60.1 mm
ThreadM14x1.50M12x1.50
Original wheels 7.5Jx18 ET40 ≈7Jx18 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Toyota BZ4X is compared with the one from BYD Atto 3 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx18 ET40 · 235/60R18 — Check on the car

    Compared with the original ≈7Jx18 ET40 on BYD Atto 3: shock absorber side +6.4 mm, wheel arch side +6.4 mm, tyre diameter +6.6 % : fit it with the original tyre size of BYD Atto 3 (215/55R18), not that of Toyota BZ4X. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BYD Atto 3 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from BYD Atto 3 on Toyota BZ4X?