Yes, the hub is identical
Same 4x100 PCD and same 54.1 mm centre bore: wheels from Toyota Carina 4 trou bolt on and centre on Toyota Tercel without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Toyota Carina 4 trou is compared with the one from Toyota Tercel of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈6Jx13 ET39 · 185/70R13 — Check on the car
Compared with the original ≈5Jx13 ET39 on Toyota Tercel: shock absorber side +12.7 mm, wheel arch side +12.7 mm, tyre diameter +1.9 %.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota Tercel (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota Tercel on Toyota Carina 4 trou?