FRENES

Wheels from Toyota Corolla E210 on Fiat Sedici: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Toyota Corolla E210 bolt on and centre on Fiat Sedici without rings. You still need to check the offset and tyres, detailed below.

Toyota Corolla E210from 2019Fiat Sedici2006–2016
PCD5x114.35x114.3
Centre bore60.1 mm60.1 mm
ThreadM12x1.5M12x1.50
Original wheels 6.5Jx15 ET40
7Jx16 ET40
7.5Jx17 ET40
8Jx18 ET40		 ≈6.5Jx15 ET50

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Toyota Corolla E210 is compared with the one from Fiat Sedici of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx15 ET40 · 195/65R15 — Check on the car

    Compared with the original ≈6.5Jx15 ET50 on Fiat Sedici: shock absorber side −10 mm, wheel arch side +10 mm, tyre diameter −2 % : fit it with the original tyre size of Fiat Sedici (205/65R15), not that of Toyota Corolla E210. Comparison for guidance only (estimated width). Check in detail

  • 7Jx16 ET40 · 205/55R16

    Fiat Sedici has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7.5Jx17 ET40 · 225/45R17

    Fiat Sedici has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 8Jx18 ET40 · 225/40R18

    Fiat Sedici has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat Sedici (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Fiat Sedici on Toyota Corolla E210?