Yes, the hub is identical
Same 5x100 PCD and same 54.1 mm centre bore: wheels from Toyota Corolla US bolt on and centre on Toyota Avensis without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Toyota Corolla US is compared with the one from Toyota Avensis of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
6Jx15 ET33 · 195/65R15 — Check on the car
Compared with the original ≈6Jx15 ET39 on Toyota Avensis: shock absorber side −6 mm, wheel arch side +6 mm, tyre diameter +3.2 % : fit it with the original tyre size of Toyota Avensis (195/60R15), not that of Toyota Corolla US.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota Avensis (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota Avensis on Toyota Corolla US?