FRENES

Wheels from Toyota GT 86 on Subaru Outback: compatible?

Yes, the hub is identical

Same 5x100 PCD and same 56.1 mm centre bore: wheels from Toyota GT 86 bolt on and centre on Subaru Outback without rings. You still need to check the offset and tyres, detailed below.

Toyota GT 86from 2012Subaru Outback1998–2003
PCD5x1005x100 / 5x114.3
Centre bore56.1 mm56.1 mm
ThreadEcrous - 12x1.25Ecrous - 12x1.25
Original wheels 7Jx17 ET48 ≈7Jx16 ET48
≈7Jx16 ET48
≈7Jx16 ET48
≈7Jx17 ET55

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Toyota GT 86 is compared with the one from Subaru Outback of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx17 ET48 · 215/45R17 — Check on the car

    Compared with the original ≈7Jx17 ET55 on Subaru Outback: shock absorber side −7 mm, wheel arch side +7 mm, tyre diameter −13.7 % : fit it with the original tyre size of Subaru Outback (225/65R17), not that of Toyota GT 86. Comparison for guidance only (estimated width). Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Subaru Outback (Ecrous - 12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Subaru Outback on Toyota GT 86?