Yes, the hub is identical
Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Toyota Yaris Cross bolt on and centre on Toyota GR Yaris without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Toyota Yaris Cross is compared with the one from Toyota GR Yaris of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
7Jx18 ET50 · 215/50R18 — Fits like the original
Compared with the original 8Jx18 ET45 on Toyota GR Yaris: shock absorber side −7.7 mm, wheel arch side −17.7 mm, tyre diameter +5.5 % : fit it with the original tyre size of Toyota GR Yaris (225/40R18), not that of Toyota Yaris Cross.
Check in detail
- ?
6.5Jx16 ET45 · 205/65R16
Toyota GR Yaris has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
7Jx17 ET50 · 215/55R17
Toyota GR Yaris has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota GR Yaris (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota GR Yaris on Toyota Yaris Cross?