Same 5x112 PCD and same 57.1 mm centre bore: wheels from Volkswagen ID.Buzz axe arrière bolt on and centre on Skoda Enyaq without rings. You still need to check the offset and tyres, detailed below.
| Volkswagen ID.Buzz axe arrièrefrom 2022 | Skoda Enyaqfrom 2020 | |
|---|---|---|
| PCD | 5x112 | 5x112 |
| Centre bore | 57.1 mm | 57.1 mm |
| Thread | M14x1.50 | M14x1.50 |
| Original wheels | 8.5Jx18 ET56 | 8Jx18 ET45 |
≈: width estimated from the original tyre size.
Each original wheel from Volkswagen ID.Buzz axe arrière is compared with the one from Skoda Enyaq of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 8Jx18 ET45 on Skoda Enyaq: shock absorber side +17.4 mm, wheel arch side −4.7 mm, tyre diameter −0.2 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Skoda Enyaq (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Skoda Enyaq on Volkswagen ID.Buzz axe arrière?