Yes, the hub is identical
Same 5x112 PCD and same 57.1 mm centre bore: wheels from Volkswagen Touran II bolt on and centre on Volkswagen Passat B6 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Volkswagen Touran II is compared with the one from Volkswagen Passat B6 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6.5Jx16 ET48 · 205/60R16 — Fits like the original
Compared with the original 7Jx16 ET45 on Volkswagen Passat B6: shock absorber side −3.3 mm, wheel arch side −9.3 mm, tyre diameter +3.2 % : fit it with the original tyre size of Volkswagen Passat B6 (205/55R16), not that of Volkswagen Touran II.
Check in detail
- ?
6.5Jx17 ET52 · 215/55R17
Volkswagen Passat B6 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
7Jx18 ET52 · 225/45R18
Volkswagen Passat B6 has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volkswagen Passat B6 (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Volkswagen Passat B6 on Volkswagen Touran II?