FRENES

Mercedes CLS W219 CLS63 AMG PCD

2006–2010
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET28
Fixing typeM14x1.50
Tightening torque130 Nm
Hub centric rings 66.6 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes CLS W219 CLS63 AMG

A Mercedes CLS W219 CLS63 AMG (2006–2010) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET28. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 130 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes CLS W219 CLS63 AMG without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes E-Classe W214 from 2023 Mercedes EQE from 2022 Mercedes C-Classe 206 from 2021 Mercedes EQA from 2021 Mercedes EQB from 2021 Mercedes EQS from 2021 Mercedes EQV from 2020 Mercedes EQC from 2019 Mercedes GLB-Classe from 2019 Mercedes A-Classe W177 from 2018 Mercedes E-Classe W213 2017–2023 Mercedes Metris 2016–2025 Mercedes SLC-Classe 2016–2020 Mercedes GLC-Classe 17 inch from 2015 Mercedes GLC-Classe 18 inch from 2015 Mercedes GLE-Classe 18 inch from 2015

Will wheels from another vehicle fit your CLS W219 CLS63 AMG?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes CLS W219 CLS63 AMG?

A Mercedes CLS W219 CLS63 AMG (2006–2010) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Mercedes CLS W219 CLS63 AMG need a hub centric ring?

The centre bore (hub diameter) of a Mercedes CLS W219 CLS63 AMG is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes CLS W219 CLS63 AMG?

The recorded original offset is ET28. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes CLS W219 CLS63 AMG?

The specified tightening torque is 130 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes CLS W219 CLS63 AMG?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Mercedes E-Classe W214, Mercedes EQE, Mercedes C-Classe 206, Mercedes EQA. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.