FRENES

Mercedes V-Classe W447 PCD

from 2014
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET52
Fixing typeM14x1.5
Tightening torque180 Nm
Original tyres245/45R18, 245/45R19
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mercedes V-Classe W447

A Mercedes V-Classe W447 (from 2014) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET52. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 180 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 245/45R18, 245/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.6 mm 7.5Jx18 ET52 245/45R18
Version 2 5x112 66.6 mm 8Jx19 ET52 245/45R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a Mercedes V-Classe W447 without rings. Offset, width, diameter and caliper clearance still need checking.

Mercedes AMG GT C192 from 2024 Mercedes CLE C236 from 2023 Mercedes CLE C236 AMG from 2023 Mercedes E-Classe W214 from 2023 Mercedes EQE SUV X294 from 2023 Mercedes GLC-Classe Coupe C254 from 2023 Mercedes EQE from 2022 Mercedes EQS SUV X296 from 2022 Mercedes GLC-Classe X254 from 2022 Mercedes SL R232 from 2022 Mercedes C-Classe 206 from 2021 Mercedes EQA from 2021 Mercedes EQB from 2021 Mercedes EQS from 2021 Mercedes EQV from 2020 Mercedes GLA-Classe H247 from 2020

Will wheels from another vehicle fit your V-Classe W447?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mercedes V-Classe W447?

A Mercedes V-Classe W447 (from 2014) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Mercedes V-Classe W447 need a hub centric ring?

The centre bore (hub diameter) of a Mercedes V-Classe W447 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mercedes V-Classe W447?

The recorded original offset is ET52 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mercedes V-Classe W447?

The specified tightening torque is 180 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mercedes V-Classe W447?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: Mercedes AMG GT C192, Mercedes CLE C236, Mercedes CLE C236 AMG, Mercedes E-Classe W214. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.