FRENES

Nio ET7 PCD

from 2021
VERIFIED
⌀62.6
PCD5x120
Centre bore62.6 mm
Offset (ET)ET38
Fixing type- 14x1.50
Original tyres245/50R19
Hub centric rings 62.6 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nio ET7

A Nio ET7 (from 2021) uses a 5x120 PCD and a centre bore of 62.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 62.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 62.6 mm.
  • Offset: the original is ET38. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread - 14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 245/50R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 62.6 mm centre bore: wheels from these vehicles bolt on and centre on a Nio ET7 without rings. Offset, width, diameter and caliper clearance still need checking.

Nio EL6 from 2023 Nio EL7 from 2022 Nio ET5 from 2022

Will wheels from another vehicle fit your ET7?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nio ET7?

A Nio ET7 (from 2021) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Nio ET7 need a hub centric ring?

The centre bore (hub diameter) of a Nio ET7 is 62.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nio ET7?

The recorded original offset is ET38. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Nio ET7?

With the same PCD (5x120) and the same centre bore (62.6 mm), these include: Nio EL6, Nio EL7, Nio ET5. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.