FRENES

Aston Martin Valour axe avant PCD

from 2023
VERIFIED
⌀75.1
PCD5x128
Centre bore75.1 mm
Fixing typeM14x1.50
Tightening torque150 Nm
Original tyres275/35R21
Hub centric rings 75.1 mm → Wheel spacers 5x128(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Aston Martin Valour axe avant

A Aston Martin Valour axe avant (from 2023) uses a 5x128 PCD and a centre bore of 75.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x128 required. See all vehicles with 5x128.
  • Centre bore: the wheel must have a centre bore of 75.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 75.1 mm.
  • Fixings: thread M14x1.50, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 275/35R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x128 PCD and same 75.1 mm centre bore: wheels from these vehicles bolt on and centre on a Aston Martin Valour axe avant without rings. Offset, width, diameter and caliper clearance still need checking.

Aston Martin Valour axe arrière from 2023 Aston Martin DBX axe avant from 2020 Aston Martin DBS Volante axe arrière from 2018 Aston Martin DBS Volante axe avant from 2018 Aston Martin Rapide AMR axe arrière from 2018 Aston Martin Rapide AMR axe avant from 2018 Aston Martin Vantage axe arrière 2018–2024 Aston Martin Vantage axe avant 2018–2024 Aston Martin Rapide S axe arrière from 2017 Aston Martin Rapide S axe avant from 2017 Aston Martin DB11 2016–2023 Aston Martin Vanquish axe arrière 2011–2018 Aston Martin Vanquish axe avant 2011–2018 Aston Martin Rapide axe arrière 2009–2017 Aston Martin Rapide axe avant 2009–2017 Aston Martin V12 Vantage axe arrière 2005–2017

Will wheels from another vehicle fit your Valour axe avant?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x128 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 75.1 mm, and will not fit if it is smaller.

Aston Martin DBX axe arrière ⌀57.1

Frequently asked questions

What is the PCD of a Aston Martin Valour axe avant?

A Aston Martin Valour axe avant (from 2023) has a PCD of 5x128: 5 studs or bolts spaced around a circle 128 mm in diameter.

Does a Aston Martin Valour axe avant need a hub centric ring?

The centre bore (hub diameter) of a Aston Martin Valour axe avant is 75.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What tightening torque for the wheels of a Aston Martin Valour axe avant?

The specified tightening torque is 150 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Aston Martin Valour axe avant?

With the same PCD (5x128) and the same centre bore (75.1 mm), these include: Aston Martin Valour axe arrière, Aston Martin DBX axe avant, Aston Martin DBS Volante axe arrière, Aston Martin DBS Volante axe avant. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.