FRENES

Aston Martin DBX axe arrière PCD

from 2020
VERIFIED
⌀57.1
PCD5x128
Centre bore57.1 mm
Offset (ET)ET56
Fixing typeM14x1.50
Tightening torque150 Nm
Original tyres325/35R22
Hub centric rings 57.1 mm → Wheel spacers 5x128(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Aston Martin DBX axe arrière

A Aston Martin DBX axe arrière (from 2020) uses a 5x128 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x128 required. See all vehicles with 5x128.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET56. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 150 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 325/35R22. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Will wheels from another vehicle fit your DBX axe arrière?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x128 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Aston Martin Valour axe arrière ⌀75.1 Aston Martin Valour axe avant ⌀75.1 Aston Martin DBX axe avant ⌀75.1 Aston Martin DBS Volante axe arrière ⌀75.1 Aston Martin DBS Volante axe avant ⌀75.1 Aston Martin Rapide AMR axe arrière ⌀75.1 Aston Martin Rapide AMR axe avant ⌀75.1 Aston Martin Vantage axe arrière ⌀75.1

Frequently asked questions

What is the PCD of a Aston Martin DBX axe arrière?

A Aston Martin DBX axe arrière (from 2020) has a PCD of 5x128: 5 studs or bolts spaced around a circle 128 mm in diameter.

Does a Aston Martin DBX axe arrière need a hub centric ring?

The centre bore (hub diameter) of a Aston Martin DBX axe arrière is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Aston Martin DBX axe arrière?

The recorded original offset is ET56. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Aston Martin DBX axe arrière?

The specified tightening torque is 150 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Does a value look wrong, or is a version missing? Let us know, we check every report.