FRENES

Bentley Azure PCD

1995–2002
VERIFIED
⌀72.5
PCD5x120
Centre bore72.5 or 72.6 mm
Offset (ET)ET47 to ET55
Fixing type-
Tightening torque120 Nm
Original tyres255/55R17, 255/45R19
Hub centric rings 72.5 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Bentley Azure

A Bentley Azure (1995–2002) uses a 5x120 PCD and a centre bore of 72.5 or 72.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120 required. See all vehicles with 5x120.
  • Centre bore: the wheel must have a centre bore of 72.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 72.5 mm.
  • Offset: the original is ET47 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread -, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 255/55R17, 255/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x120 72.5 mm — ET55 255/55R17
Version 2 5x120 72.6 mm — ET47 255/45R19

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 72.5 mm centre bore: wheels from these vehicles bolt on and centre on a Bentley Azure without rings. Offset, width, diameter and caliper clearance still need checking.

Bentley Brooklands 2008–2011 Bentley Arnage 1998–2001 BMW 2 Serie Convertible F22 2014–2021 BMW 4 Serie Convertible F33 2014–2020 BMW 4 Serie Gran Coupe F36 2014–2020 BMW M3 F80 2014–2018 BMW M4 F82 from 2014 BMW X4 F26 2014–2018 BMW 2 Serie Coupe F22 2013–2021 BMW 3 Serie Gran Turismo F34 2013–2019 BMW 4 Serie Coupe F32 2013–2020 BMW M6 F14 Gran Coupe 2013–2018 Mini Paceman 2013–2017 BMW 1 Serie F21 2012–2019 BMW 3 Serie F30 2012–2019 BMW 3 Serie F31 2012–2019

Will wheels from another vehicle fit your Azure?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Bentley Azure?

A Bentley Azure (1995–2002) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a Bentley Azure need a hub centric ring?

The centre bore (hub diameter) of a Bentley Azure is 72.5 or 72.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Bentley Azure?

The recorded original offset is ET47 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Bentley Azure?

The specified tightening torque is 120 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Bentley Azure?

With the same PCD (5x120) and the same centre bore (72.5 mm), these include: Bentley Brooklands, Bentley Arnage, BMW 2 Serie Convertible F22, BMW 4 Serie Convertible F33. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.