Bentley Continental GTC PCD

2003–2010
VERIFIED
⌀57
PCD5x112 or 5x130
Centre bore57 or 57.1 or 71.6 mm
Offset (ET)ET40 to ET61
Fixing typeM14x1.50
Tightening torque120 Nm
Original tyres275/40R19, 265/40R21
⚠ This model comes with 5x112 or 5x130 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Bentley Continental GTC

A Bentley Continental GTC (2003–2010) uses a 5x112 or 5x130 PCD and a centre bore of 57 or 57.1 or 71.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 or 5x130 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57 mm.
  • Offset: the original is ET40 to ET61. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 275/40R19, 265/40R21. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57 mm — ET43 —
Version 2 5x112 57.1 mm — ET40 275/40R19
Version 3 5x130 71.6 mm — ET61 265/40R21

Will wheels from another vehicle fit your Continental GTC?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Bentley Continental GTC?

A Bentley Continental GTC (2003–2010) can have a 5x112 or 5x130 PCD depending on the version: check on an original wheel.

Does a Bentley Continental GTC need a hub centric ring?

The centre bore (hub diameter) of a Bentley Continental GTC is 57 or 57.1 or 71.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Bentley Continental GTC?

The recorded original offset is ET40 to ET61 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Bentley Continental GTC?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Bentley Continental GTC?

With the same PCD (5x112) and the same centre bore (57 mm), these include: Bentley Continental Flying Spur, Bentley Continental GT. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.