FRENES

BMW X1 U11 PCD

from 2022
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET41 to ET46
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres205/65R17, 245/45R19
Toutes motorisations, dont l'hybride rechargeable xDrive30e.
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BMW X1 U11

A BMW X1 U11 (from 2022) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET41 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/65R17, 245/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.6 mm 7Jx17 ET41 205/65R17
Version 2 5x112 66.6 mm 8Jx19 ET46 245/45R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a BMW X1 U11 without rings. Offset, width, diameter and caliper clearance still need checking.

BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW I5 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023 BMW 7 Serie G70 from 2022 BMW i7 from 2022 BMW iX1 U11 from 2022 BMW 2 Serie F44 from 2021 BMW i4 from 2021 BMW iX from 2021 BMW 4 Serie G22-G23-G26 from 2020 BMW iX3 G08 from 2020 BMW X6 M F96 axe arrière from 2020 BMW X6 M F96 axe avant from 2020 BMW 3 Serie G20-G21 from 2019

Will wheels from another vehicle fit your X1 U11?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a BMW X1 U11?

A BMW X1 U11 (from 2022) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a BMW X1 U11 need a hub centric ring?

The centre bore (hub diameter) of a BMW X1 U11 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BMW X1 U11?

The recorded original offset is ET41 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BMW X1 U11?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BMW X1 U11?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: BMW iX2 U10, BMW X2 U10, BMW I5, BMW XM G09 axe arrière. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.