FRENES

BMW X6 M F96 axe arrière PCD

from 2020
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET43
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres315/30R22
Hub centric rings 66.6 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BMW X6 M F96 axe arrière

A BMW X6 M F96 axe arrière (from 2020) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 315/30R22. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a BMW X6 M F96 axe arrière without rings. Offset, width, diameter and caliper clearance still need checking.

BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW I5 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023 BMW 7 Serie G70 from 2022 BMW i7 from 2022 BMW iX1 U11 from 2022 BMW 2 Serie F44 from 2021 BMW i4 from 2021 BMW iX from 2021 BMW 4 Serie G22-G23-G26 from 2020 BMW iX3 G08 from 2020 BMW X6 M F96 axe avant from 2020 BMW 3 Serie G20-G21 from 2019 BMW M8 from 2019

Will wheels from another vehicle fit your X6 M F96 axe arrière?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a BMW X6 M F96 axe arrière?

A BMW X6 M F96 axe arrière (from 2020) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a BMW X6 M F96 axe arrière need a hub centric ring?

The centre bore (hub diameter) of a BMW X6 M F96 axe arrière is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BMW X6 M F96 axe arrière?

The recorded original offset is ET43. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BMW X6 M F96 axe arrière?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BMW X6 M F96 axe arrière?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: BMW iX2 U10, BMW X2 U10, BMW I5, BMW XM G09 axe arrière. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.