BYD Han PCD

from 2022

VERIFIED

Centre bore64.1 mm

Offset (ET)ET41

Fixing typeEcrous - 12x1.50

Tightening torque120 Nm

Original tyres245/45R19

Hub centric rings 64.1 mm → Wheel spacers 5x120(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BYD Han

A BYD Han (from 2022) uses a 5x120 PCD and a centre bore of 64.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120 required. See all vehicles with 5x120.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 245/45R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x120 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a BYD Han without rings. Offset, width, diameter and caliper clearance still need checking.

BYD Seal from 2022 BYD Tang from 2021 BYD Etp3 from 2014 BYD M3 from 2014 BYD T3 from 2014 Acura RLX from 2018 Nio ES8 from 2018 Acura MDX from 2017 Tesla Model X from 2016 Tesla Model S from 2012 Honda Ridgeline from 2005 Honda Pilot 2003–2008 Honda Legend 1985–1990

Will wheels from another vehicle fit your Han?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a BYD Han?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from BYD Seal from 2022 Wheels from Acura RLX from 2018 Wheels from Nio ES8 from 2018 Wheels from Tesla Model X from 2016

Same PCD, different centre bore

These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.

Lexus TX ⌀60.1 Nio EL6 ⌀62.6 VinFast VF6 ⌀74.1 VinFast VF8 ⌀74.1 VinFast VF9 ⌀74.1 Land Rover Range Rover V ⌀72.6 Lotus Eletre ⌀63.4 Nio EL7 ⌀62.6

Frequently asked questions

What is the PCD of a BYD Han?

A BYD Han (from 2022) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.

Does a BYD Han need a hub centric ring?

The centre bore (hub diameter) of a BYD Han is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BYD Han?

The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BYD Han?

The specified tightening torque is 120 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BYD Han?

With the same PCD (5x120) and the same centre bore (64.1 mm), these include: BYD Seal, BYD Tang, BYD Etp3, BYD M3. Offset, width and rim diameter still need checking for each vehicle.

Other BYD models

Dolphin Plus 5x114.3 Seal 5x120 Atto 3 5x114.3 Dolphin 5x114.3 Tang 5x120 Etp3 5x120 M3 5x120 T3 5x120 All BYD →

Does a value look wrong, or is a version missing? Let us know, we check every report.