A Honda Civic Type R FK8 (2017–2022) uses a 5x120 PCD and a centre bore of 64.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 64.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 64.1 mm.
Offset: the original is ET55 to ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5, tightened to 127 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 235/40R18, 245/30R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Honda Civic Type R
Previous generation: Honda Civic Type R FK2 (2015–2017) — same 5x120 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter. Next generation: Honda Civic Type R FL5 (from 2022) — same 5x120 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x120
64.1 mm
8Jx18
ET55
235/40R18
Version 2
5x120
64.1 mm
8.5Jx20
ET60
245/30R20
Vehicles with the same PCD and centre bore
Same 5x120 PCD and same 64.1 mm centre bore: wheels from these vehicles bolt on and centre on a Honda Civic Type R FK8 without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x120 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 64.1 mm, and will not fit if it is smaller.
A Honda Civic Type R FK8 (2017–2022) has a PCD of 5x120: 5 studs or bolts spaced around a circle 120 mm in diameter.
Does a Honda Civic Type R FK8 need a hub centric ring?
The centre bore (hub diameter) of a Honda Civic Type R FK8 is 64.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Honda Civic Type R FK8?
The recorded original offset is ET55 to ET60 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Honda Civic Type R FK8?
The specified tightening torque is 127 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Honda Civic Type R FK8?
With the same PCD (5x120) and the same centre bore (64.1 mm), these include: Honda CR-V RS, Honda Civic Type R FL5, Honda Civic Type R FK2, Honda Ridgeline. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more