A Chevrolet Colorado (2005–2008) uses a 6x139.7 PCD and a centre bore of 99.5 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 99.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 99.5 mm.
Offset: the original is ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Vehicles with the same PCD and centre bore
Same 6x139.7 PCD and same 99.5 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Colorado without rings. Offset, width, diameter and caliper clearance still need checking.
Will wheels from another vehicle fit your Colorado?
Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.
Same PCD, different centre bore
These vehicles also use 6x139.7 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 99.5 mm, and will not fit if it is smaller.
A Chevrolet Colorado (2005–2008) has a PCD of 6x139.7: 6 studs or bolts spaced around a circle 139.7 mm in diameter.
Does a Chevrolet Colorado need a hub centric ring?
The centre bore (hub diameter) of a Chevrolet Colorado is 99.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Chevrolet Colorado?
The recorded original offset is ET33. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
What tightening torque for the wheels of a Chevrolet Colorado?
The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.
Which vehicles have the same PCD as a Chevrolet Colorado?
With the same PCD (6x139.7) and the same centre bore (99.5 mm), these include: Holden Colorado, Hummer H3, GMC Canyon. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more