Chevrolet Orlando PCD

2011–2014

VERIFIED

Centre bore70.3 mm

Offset (ET)ET41

Fixing typeEcrous - 12x1.50

Tightening torque140 Nm

Hub centric rings 70.3 mm → Wheel spacers 5x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chevrolet Orlando

A Chevrolet Orlando (2011–2014) uses a 5x115 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x115 required. See all vehicles with 5x115.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET41. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x115 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Chevrolet Orlando without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Volt from 2012 Chevrolet Cruze Diesel from 2009 Chevrolet Captiva from 2006 Chevrolet Equinox 2004–2009 Chevrolet Transport 4WD 2002–2005 Chevrolet Alero 1998–2001 Chevrolet Transport 1997–2005 Chevrolet Lumina 1990–1999 Chevrolet Celebrity 1982–1990 Chevrolet Monte Carlo 1969–1981 Chevrolet Malibu 1964–1983 Chevrolet Impala 1957–1971 Cadillac ATS 2013–2019 Opel Cascada 2013–2019 Holden Cruze Wagon Diesel from 2012 Holden Volt from 2012

Will wheels from another vehicle fit your Orlando?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Dodge Challenger ⌀71.6 Opel Insignia ⌀70.2 Dodge Charger ⌀71.6 Chrysler 300C ⌀71.6 Chrysler 300C 4x4 ⌀71.6 Dodge Magnum ⌀71.6 Dodge Magnum 4x4 ⌀71.6 Lancia Thema ⌀71.5

Frequently asked questions

What is the PCD of a Chevrolet Orlando?

A Chevrolet Orlando (2011–2014) has a PCD of 5x115: 5 studs or bolts spaced around a circle 115 mm in diameter.

Does a Chevrolet Orlando need a hub centric ring?

The centre bore (hub diameter) of a Chevrolet Orlando is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chevrolet Orlando?

The recorded original offset is ET41. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Chevrolet Orlando?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Chevrolet Orlando?

With the same PCD (5x115) and the same centre bore (70.3 mm), these include: Chevrolet Volt, Chevrolet Cruze Diesel, Chevrolet Captiva, Chevrolet Equinox. Offset, width and rim diameter still need checking for each vehicle.

Other Chevrolet models

Corvette C8 5x120 Bolt EV 5x105 Spark M400 4x100 Trax 5x105 Corvette C7 5x120.65 Volt 5x115 Aveo 4 trou 4x100 Aveo 5 trou 5x105 Spark M300 4x100 Silverado 2500 8x180 Cruze Essence 5x105 Traverse 6x132 All Chevrolet →

Does a value look wrong, or is a version missing? Let us know, we check every report.