FRENES

GMC Sierra 3500 PCD

from 2010
VERIFIED
⌀124
PCD8x180
Centre bore124 mm
Offset (ET)ET44
Fixing typeEcrous - 14x1.50
Original tyres245/75R17, 265/70R17, 265/70R18, 265/60R20
Hub centric rings 124 mm → Wheel spacers 8x180(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a GMC Sierra 3500

A GMC Sierra 3500 (from 2010) uses a 8x180 PCD and a centre bore of 124 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 8x180 required. See all vehicles with 8x180.
  • Centre bore: the wheel must have a centre bore of 124 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 124 mm.
  • Offset: the original is ET44. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 245/75R17, 265/70R17, 265/70R18, 265/60R20. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 8x180 124 mm 7.5Jx17 ET44 245/75R17
Version 2 8x180 124 mm 7.5Jx17 ET44 265/70R17
Version 3 8x180 124 mm 8Jx18 ET44 265/70R18
Version 4 8x180 124 mm 8.5Jx20 ET44 265/60R20

Vehicles with the same PCD and centre bore

Same 8x180 PCD and same 124 mm centre bore: wheels from these vehicles bolt on and centre on a GMC Sierra 3500 without rings. Offset, width, diameter and caliper clearance still need checking.

GMC Sierra 2500 from 2010 Chevrolet Silverado 2500 from 2010

Will wheels from another vehicle fit your Sierra 3500?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a GMC Sierra 3500?

A GMC Sierra 3500 (from 2010) has a PCD of 8x180: 8 studs or bolts spaced around a circle 180 mm in diameter.

Does a GMC Sierra 3500 need a hub centric ring?

The centre bore (hub diameter) of a GMC Sierra 3500 is 124 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a GMC Sierra 3500?

The recorded original offset is ET44 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a GMC Sierra 3500?

With the same PCD (8x180) and the same centre bore (124 mm), these include: GMC Sierra 2500, Chevrolet Silverado 2500. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.