FRENES

Iveco Daily Double PCD

1999–2006
VERIFIED
⌀130.1
PCD6x170
Centre bore130.1 mm
Offset (ET)ET109 to ET115
Fixing typeEcrous - 18x1.50
Tightening torque160 Nm
Original tyres185/75R16, 195/65R16
Hub centric rings 130.1 mm → Wheel spacers 6x170(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Iveco Daily Double

A Iveco Daily Double (1999–2006) uses a 6x170 PCD and a centre bore of 130.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x170 required. See all vehicles with 6x170.
  • Centre bore: the wheel must have a centre bore of 130.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 130.1 mm.
  • Offset: the original is ET109 to ET115. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 18x1.50, tightened to 160 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/75R16, 195/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x170 130.1 mm — ET109 185/75R16
Version 2 6x170 130.1 mm — ET115 195/65R16

Will wheels from another vehicle fit your Daily Double?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Iveco Daily Double?

A Iveco Daily Double (1999–2006) has a PCD of 6x170: 6 studs or bolts spaced around a circle 170 mm in diameter.

Does a Iveco Daily Double need a hub centric ring?

The centre bore (hub diameter) of a Iveco Daily Double is 130.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Iveco Daily Double?

The recorded original offset is ET109 to ET115 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Iveco Daily Double?

The specified tightening torque is 160 Nm for Ecrous - 18x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Does a value look wrong, or is a version missing? Let us know, we check every report.