FRENES

Iveco Daily Single PCD

1999–2006
VERIFIED
⌀74.1
PCD6x125 or 5x118
Centre bore71.1 or 74.1 mm
Offset (ET)ET68
Fixing typeM14x1.50
Original tyres205/70R15, 225/65R16, 215/65R16
⚠ This model comes with 6x125 or 5x118 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 74.1 mm → Wheel spacers 6x125(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Iveco Daily Single

A Iveco Daily Single (1999–2006) uses a 6x125 or 5x118 PCD and a centre bore of 71.1 or 74.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x125 or 5x118 required. See all vehicles with 6x125.
  • Centre bore: the wheel must have a centre bore of 74.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 74.1 mm.
  • Offset: the original is ET68. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 205/70R15, 225/65R16, 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x118 71.1 mm — ET68 205/70R15
Version 2 6x125 74.1 mm — ET68 225/65R16
Version 3 6x125 74.1 mm — ET68 215/65R16

Will wheels from another vehicle fit your Daily Single?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Iveco Daily Single?

A Iveco Daily Single (1999–2006) can have a 6x125 or 5x118 PCD depending on the version: check on an original wheel.

Does a Iveco Daily Single need a hub centric ring?

The centre bore (hub diameter) of a Iveco Daily Single is 71.1 or 74.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Iveco Daily Single?

The recorded original offset is ET68 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Does a value look wrong, or is a version missing? Let us know, we check every report.