Same 4x98 PCD and same 58.1 mm centre bore: wheels from Alfa Romeo Mito bolt on and centre on Fiat 500e II without rings. You still need to check the offset and tyres, detailed below.
| Alfa Romeo Mito2008–2019 | Fiat 500e IIfrom 2020 | |
|---|---|---|
| PCD | 4x98 | 4x98 |
| Centre bore | 58.1 mm | 58.1 mm |
| Thread | M12x1.25 | M12x1.25 |
| Original wheels | 7Jx16 ET40 | 6Jx15 ET40 6Jx16 ET41 6.5Jx17 ET41 |
≈: width estimated from the original tyre size.
Each original wheel from Alfa Romeo Mito is compared with the one from Fiat 500e II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 6Jx16 ET41 on Fiat 500e II: shock absorber side +11.7 mm, wheel arch side +13.7 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat 500e II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Fiat 500e II on Alfa Romeo Mito?