FRENES

Wheels from Fiat 500e II on Alfa Romeo Mito: compatible?

Yes, the hub is identical

Same 4x98 PCD and same 58.1 mm centre bore: wheels from Fiat 500e II bolt on and centre on Alfa Romeo Mito without rings. You still need to check the offset and tyres, detailed below.

Fiat 500e IIfrom 2020Alfa Romeo Mito2008–2019
PCD4x984x98
Centre bore58.1 mm58.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6Jx15 ET40
6Jx16 ET41
6.5Jx17 ET41		 7Jx16 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Fiat 500e II is compared with the one from Alfa Romeo Mito of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx16 ET41 · 195/55R16 — Fits like the original

    Compared with the original 7Jx16 ET40 on Alfa Romeo Mito: shock absorber side −11.7 mm, wheel arch side −13.7 mm, tyre diameter +0 %. Check in detail

  • 6Jx15 ET40 · 185/65R15

    Alfa Romeo Mito has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 6.5Jx17 ET41 · 205/45R17

    Alfa Romeo Mito has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Alfa Romeo Mito (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Alfa Romeo Mito on Fiat 500e II?