Yes, the hub is identical
Same 5x120 PCD and same 64.1 mm centre bore: wheels from BYD Han bolt on and centre on Tesla Model X without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from BYD Han is compared with the one from Tesla Model X of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
≈7.5Jx19 ET41 · 245/45R19 — Fits like the original
Compared with the original 8.5Jx19 ET35 on Tesla Model X: shock absorber side −6.7 mm, wheel arch side −18.7 mm, tyre diameter −6 % : fit it with the original tyre size of Tesla Model X (265/50R19), not that of BYD Han.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Tesla Model X (Ecrous - 14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Tesla Model X on BYD Han?