FRENES

Wheels from Citroen Berlingo III on Fiat Scudo: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Citroen Berlingo III bolt on and centre on Fiat Scudo without rings. You still need to check the offset and tyres, detailed below.

Citroen Berlingo IIIfrom 2018Fiat Scudo1996–2004
PCD5x1085x98 / 5x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M14x1.50
Original wheels 6.5Jx15 ET42
6.5Jx16 ET47
7Jx17 ET50		 R
R
R
≈7Jx16 ET46

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen Berlingo III is compared with the one from Fiat Scudo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET47 · 205/60R16 — Fits like the original

    Compared with the original ≈7Jx16 ET46 on Fiat Scudo: shock absorber side −5.3 mm, wheel arch side −7.3 mm, tyre diameter −4.9 % : fit it with the original tyre size of Fiat Scudo (215/65R16), not that of Citroen Berlingo III. Comparison for guidance only (estimated width). Check in detail

  • 6.5Jx15 ET42 · 195/65R15

    Fiat Scudo has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET50 · 205/55R17

    Fiat Scudo has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat Scudo (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Fiat Scudo on Citroen Berlingo III?