FRENES

Wheels from Citroen Berlingo III on Toyota ProAce: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Citroen Berlingo III bolt on and centre on Toyota ProAce without rings. You still need to check the offset and tyres, detailed below.

Citroen Berlingo IIIfrom 2018Toyota ProAce2013–2016
PCD5x1085x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6.5Jx15 ET42
6.5Jx16 ET47
7Jx17 ET50		 7Jx16 ET39
≈7Jx16 ET46

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen Berlingo III is compared with the one from Toyota ProAce of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET47 · 205/60R16 — Fits like the original

    Compared with the original 7Jx16 ET39 on Toyota ProAce: shock absorber side +1.7 mm, wheel arch side −14.4 mm, tyre diameter −1.8 %. Check in detail

  • 6.5Jx15 ET42 · 195/65R15

    Toyota ProAce has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET50 · 205/55R17

    Toyota ProAce has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota ProAce (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Toyota ProAce on Citroen Berlingo III?