FRENES

Wheels from Citroen C3 IV on Lancia Ypsilon (2024): compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Citroen C3 IV bolt on and centre on Lancia Ypsilon (2024) without rings. You still need to check the offset and tyres, detailed below.

Citroen C3 IVfrom 2024Lancia Ypsilon (2024)from 2024
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 7Jx16 ET42
7Jx17 ET42		 6.5Jx16 ET38

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Citroen C3 IV is compared with the one from Lancia Ypsilon (2024) of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx16 ET42 · 205/55R16 — Risk of rubbing

    Compared with the original 6.5Jx16 ET38 on Lancia Ypsilon (2024): shock absorber side +10.4 mm, wheel arch side +2.3 mm, tyre diameter +1.8 %. Check in detail

  • 7Jx17 ET42 · 205/50R17

    Lancia Ypsilon (2024) has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lancia Ypsilon (2024) (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Lancia Ypsilon (2024) on Citroen C3 IV?