Yes, the hub is identical
Same 4x108 PCD and same 65.1 mm centre bore: wheels from Fiat 600 bolt on and centre on Lancia Ypsilon (2024) without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Fiat 600 is compared with the one from Lancia Ypsilon (2024) of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈7Jx16 ET32 · 215/65R16 — Check on the car
Compared with the original 6.5Jx16 ET38 on Lancia Ypsilon (2024): shock absorber side 0 mm, wheel arch side +12.4 mm, tyre diameter +10.5 % : fit it with the original tyre size of Lancia Ypsilon (2024) (195/55R16), not that of Fiat 600.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lancia Ypsilon (2024) (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Lancia Ypsilon (2024) on Fiat 600?