Same 4x100 PCD and same 60.1 mm centre bore: wheels from Dacia Spring bolt on and centre on Nissan Micra K12 without rings. You still need to check the offset and tyres, detailed below.
| Dacia Springfrom 2021 | Nissan Micra K122003–2010 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 60.1 mm | 60.1 mm |
| Thread | M12x1.50 | M12x1.50 |
| Original wheels | 4.5Jx14 ET37 | 5Jx14 ET45 |
≈: width estimated from the original tyre size.
Each original wheel from Dacia Spring is compared with the one from Nissan Micra K12 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5Jx14 ET45 on Nissan Micra K12: shock absorber side −14.4 mm, wheel arch side +1.7 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Micra K12 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Nissan Micra K12 on Dacia Spring?