FRENES

Nissan Micra K12 PCD

2003–2010
VERIFIED
⌀60.1
PCD4x100
Centre bore60.1 mm
Offset (ET)ET45
Fixing typeM12x1.50
Tightening torque105 Nm
Original tyres165/70R14
Hub centric rings 60.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Micra K12

A Nissan Micra K12 (2003–2010) uses a 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 165/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan Micra K12 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Micra K14 from 2017 Nissan Almera from 2015 Nissan Note 2006–2013 Nissan Kubistar 2003–2009 Nissan Cube 2002–2008 Nissan Platina 2002–2010 Renault Twingo E-Tech from 2026 Dacia Jogger from 2022 Dacia Spring from 2021 Dacia Sandero III from 2020 Renault Clio 5 from 2019 Renault Twingo 3 2014–2024 Smart Forfour Back 2014–2021 Smart Forfour Front 2014–2021 Renault Captur I 2013–2020 Renault Clio GrandTour 2013–2023

Will wheels from another vehicle fit your Micra K12?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan Micra K12?

A Nissan Micra K12 (2003–2010) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Nissan Micra K12 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Micra K12 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Micra K12?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Micra K12?

The specified tightening torque is 105 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Micra K12?

With the same PCD (4x100) and the same centre bore (60.1 mm), these include: Nissan Micra K14, Nissan Almera, Nissan Note, Nissan Kubistar. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.