FRENES

Wheels from Dodge RAM 1500 on Chrysler Aspen: compatible?

Yes, the hub is identical

Same 5x139.7 PCD and same 78.1 mm centre bore: wheels from Dodge RAM 1500 bolt on and centre on Chrysler Aspen without rings. You still need to check the offset and tyres, detailed below.

Dodge RAM 15001993–2001Chrysler Aspen2006–2009
PCD5x139.7 / 6x139.75x139.7
Centre bore78.1 mm78.1 mm
ThreadEcrous - 1/2 - 20 UNEcrous - 9/16 - 18 U
Original wheels ≈7Jx16 ET31
≈7.5Jx17 ET25
≈8.5Jx17 ET26
≈8.5Jx18 ET26		 ≈7.5Jx17 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Dodge RAM 1500 is compared with the one from Chrysler Aspen of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • ≈7.5Jx17 ET25 · 245/70R17 — Check on the car

    Compared with the original ≈7.5Jx17 ET35 on Chrysler Aspen: shock absorber side −10 mm, wheel arch side +10 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • ≈8.5Jx17 ET26 · 265/70R17 — Check on the car

    Compared with the original ≈7.5Jx17 ET35 on Chrysler Aspen: shock absorber side +3.7 mm, wheel arch side +21.7 mm, tyre diameter +3.6 % : fit it with the original tyre size of Chrysler Aspen (245/70R17), not that of Dodge RAM 1500. Comparison for guidance only (estimated width). Check in detail

  • ≈7Jx16 ET31 · 225/75R16

    Chrysler Aspen has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • ≈8.5Jx18 ET26 · 275/65R18

    Chrysler Aspen has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Chrysler Aspen (Ecrous - 9/16 - 18 U), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Chrysler Aspen on Dodge RAM 1500?