Same 4x108 PCD and same 65.1 mm centre bore: wheels from DS DS 6 bolt on and centre on Peugeot 2008 II without rings. You still need to check the offset and tyres, detailed below.
| DS DS 62014–2019 | Peugeot 2008 IIfrom 2019 | |
|---|---|---|
| PCD | 4x108 | 4x108 |
| Centre bore | 65.1 mm | 65.1 mm |
| Thread | M12x1.25 | M12x1.25 |
| Original wheels | 7.5Jx17 ET27 | 6.5Jx16 ET32 6.5Jx17 ET32 7Jx18 ET35 |
≈: width estimated from the original tyre size.
Each original wheel from DS DS 6 is compared with the one from Peugeot 2008 II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 6.5Jx17 ET32 on Peugeot 2008 II: shock absorber side +7.7 mm, wheel arch side +17.7 mm, tyre diameter +0.1 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 2008 II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Peugeot 2008 II on DS DS 6?