FRENES

Peugeot 2008 II PCD

from 2019
VERIFIED
⌀65.1
PCD4x108
Centre bore65.1 mm
Offset (ET)ET32 to ET35
Fixing typeM12x1.25
Tightening torque95 Nm
Original tyres215/65R16, 215/60R17, 215/55R18
Hub centric rings 65.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Peugeot 2008 II

A Peugeot 2008 II (from 2019) uses a 4x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET32 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R16, 215/60R17, 215/55R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x108 65.1 mm 6.5Jx16 ET32 215/65R16
Version 2 4x108 65.1 mm 6.5Jx17 ET32 215/60R17
Version 3 4x108 65.1 mm 7Jx18 ET35 215/55R18

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Peugeot 2008 II without rings. Offset, width, diameter and caliper clearance still need checking.

Peugeot e-208 from 2023 Peugeot 208 II from 2019 Peugeot 2008 I 2013–2019 Peugeot 208 I 2012–2021 Peugeot 206 Plus 2009–2012 Peugeot 3008 I 2009–2016 Peugeot 5008 I 2009–2017 Peugeot Partner Origin from 2008 Peugeot Partner Tepee from 2008 Peugeot 207CC 2007–2014 Peugeot 308 I 2007–2013 Peugeot 308CC from 2007 Peugeot 207 2006–2014 Peugeot 1007 2004–2009 Peugeot 307CC 2003–2009 Peugeot 206CC 2001–2007

Will wheels from another vehicle fit your 2008 II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Peugeot 2008 II?

A Peugeot 2008 II (from 2019) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Peugeot 2008 II need a hub centric ring?

The centre bore (hub diameter) of a Peugeot 2008 II is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Peugeot 2008 II?

The recorded original offset is ET32 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Peugeot 2008 II?

The specified tightening torque is 95 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Peugeot 2008 II?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: Peugeot e-208, Peugeot 208 II, Peugeot 2008 I, Peugeot 208 I. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.