FRENES

Wheels from DS DS 9 on Peugeot 308 II: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from DS DS 9 bolt on and centre on Peugeot 308 II without rings. You still need to check the offset and tyres, detailed below.

DS DS 92020–2026Peugeot 308 II2013–2021
PCD5x1085x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 7.5Jx19 ET46 6.5Jx15 ET42
7Jx16 ET44
7.5Jx17 ET44
8Jx18 ET48
8Jx19 ET42

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from DS DS 9 is compared with the one from Peugeot 308 II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx19 ET46 · 235/45R19 — Fits like the original

    Compared with the original 8Jx19 ET42 on Peugeot 308 II: shock absorber side −2.3 mm, wheel arch side −10.4 mm, tyre diameter +7.3 % : fit it with the original tyre size of Peugeot 308 II (235/35R19), not that of DS DS 9. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 308 II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Peugeot 308 II on DS DS 9?